 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MP6H1 Transistors General purpose (Dual digital transistors) MP6H1 Features 1) High hFE. hFE=300(Min.)(VCE / IC=2V/500mA) 2) Low saturation voltage. VCE(sat)=400mV(Max.) (IC/IB=500mA/5mA) 3) Built in Zener diode for protection against surges when connected to inductive load. Dimensions (Unit : mm) MPT6 (6) (5) (4) (1) (2) (3) Structure NPN silicon epitaxial planar transistor (Resistor built-in type) Applications Driver Packaging specifications and hFE Package Packaging style Type Code Basic ordering unit(pieces) MP6H1 Equivalent circuit MPT6 Taping TR 1000 (6) (5) R Di (4) R=10k DTr1 Di R DTr2 (1) : Emitter (2) : Base (3) : Collector (4) : Emitter (5) : Base (6) : Collector (DTr1) (DTr1) (DTr2) (DTr2) (DTr2) (DTr1) (1) (2) (3) Absolute maximum ratings (Ta=25C) DTR1 DTR2 Parameter Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Storage temperature 1 Pw=10ms, Single pulse 2 Each terminal mounted on a ceramic board Continuous Pulsed Symbol VCBO VCEO VEBO IC ICP 1 PD *2 T Tstg Unit Limits V 6010 V 6010 V 5 A 1 A 2 2.0 W/TOTAL W/ELEMENT 1.4 150 -55 to +150 Rev.A 1/3 MP6H1 Transistor Electrical characteristics (Ta=25C) DTR1 DTR2 Parameter Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Emitter-base resistance Transition frequency Symbol BVCEO BVCBO BVEBO ICBO IEBO VCE(sat) hFE R fT * Min. 50 50 5 300 300 7 Typ. 10 80 Max. 70 70 500 580 400 13 Unit V V V nA A mV k MH VCE=5V,IE=-100mA,f=30MHz Test Conditions IC=1mA IC=50A IE=720A VCB=40V VEB=4V IC/IB=500mA/5mA VCE=2V,IC=500mA Characteristics of built-in transistor. Rev.A 2/3 MP6H1 Transistor Electrical characteristic curves 1 Collector Current : IC [A] Collector Current : IC [mA] VCE=2V pulsed 500 Ta=25 pulsed IB=600A IB=500A IB=400A 300 IB=300A 200 IB=200A 100 IB=100A 0.01 0.1 1 10 Base to Emitter Voltage : VBE [V] 0 0 0.5 1 1.5 2 Collector to Emitter Voltage : VCE [V] 10 0.001 0.01 0.1 1 Collector Current : IC [A] 10 DC Current Gain : hFE 1000 10000 Ta=25 pulsed VCE=5V 400 0.1 Ta=125 Ta=25 Ta=-40 100 VCE=2V Fig.1 Grounded Emitter Propagation Characteristics Fig.2 Typical Output Characteristics Fig.3 DC Current Gain vs Collector Current 10000 VCE=2V pulsed DC Current Gain : hFE 1000 Ta=-40 Collector Saturation Voltage : VCE(sat) [V] 10 Ta=25 pulsed 1 Collector Saturation Voltage : VCE(sat) [V] IC/IB=200/1 10 IC/IB=100/1 pulsed 1 Ta=125 Ta=25 100 Ta=25 Ta=125 0.1 IC/IB=100/1 0.1 Ta=-40 10 0.001 0.01 0.1 1 Collector Current : IC [A] 10 0.01 0.01 0.1 1 Collector Current : IC [A] 10 0.01 0.01 0.1 1 Collector Current : IC [A] 10 Fig.4 DC Current Gain vs Collector Current Fig.5 Collector-Emitter Saturation Voltage vs Collector Current Fig.6 Collector-Emitter Saturation Voltage vs Collector Current 10 Collector Current : IC[ A ] IC/IB=10/1 pulsed 10 Pw = 1ms Ta=-40 Ta=25 Ta=125 1 Base-Emitter Saturation Voltage : VBE(sat) [V] 1 0.1 DC Operation Pw = 10ms 0.01 Ta=25 Single pulse Mounted on a ceramic board 0.1 1 10 100 Collector to Emitter Voltage : VCE [ V ] 0.1 0.01 0.001 0.1 1 Collector Current : IC [A] 10 Fig.7 Base-Emitter Saturation Voltage vs Collector Current Fig.8 Maximum Safe Operating Area Rev.A 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright (c) 2008 ROHM CO.,LTD. THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0 |
Price & Availability of MP6H1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |